:|
Quantity
|
Out of stock
|
||
|
|
|||
Diversity is the key to success. The Smart Home Panel system connects up to 10 home electrical circuits for backup power, with different current values for different connected loads.
Simple installation. After consulting with an electrician and determining backup loads, relay modules can be easily installed and replaced.
Replacement without affecting other circuits. Each module has two modules and an overcurrent protection fuse for each circuit. This means you can replace one without affecting other circuits. If you need to change the relay module, the EcoFlow app and the built-in LED will notify you of any errors.
How to choose
Load planning
With the Smart Home Panel system, selective loads are placed where they will be most effective during power outages or energy saving management. Consider areas that significantly affect comfort, such as the refrigerator and lighting, and select a maximum of 10 sample loads from your current distributor based on their load efficiency.
Collect load information
Determine the number and amperage of the load circuits you plan to connect. If you need help with this, contact your electrician.
Determine the required relay modules
Select the relay module that matches the current rating for the current distributor above this load circuit.
How to install
.png)
|
STEP 1 Unscrew the screws from the bottom, side and top of the Smart Home panel to remove its front panel part. |
STEP 2 Contractors should install the relay module in a location that matches the circuit they plan to use. |
STEP 3 Secure the relay module by tightening the two screws. |
In the box
1. Relay module (Smart panel for home automation)ʼ
*"The manufacturer reserves the right to change the composition, completeness, color range of the product, warranty period, technical characteristics, etc. without prior notice. Therefore, the product description: technical characteristics, completeness, individual properties – may differ"