Autel EVO Max 4T quadcopter

Powerful quadcopter with thermal imager, optical zoom and range finder

EVO Max 4T quadcopter offers users powerful technologies and extended autonomy. The EVO Max 4T evaluates complex environments to generate real-time 3D flight trajectories for unprecedented obstacle avoidance. Advanced sensors enable flight in areas inaccessible to GPS, and an incredible new thermal payload opens up new scenarios for object identification and tracking. A rugged, weather-resistant design, the EVO Max 4T is as portable as it gets.

Absence of blind spots and absolute flying over obstacles

The features of this quadcopter include a combination of conventional binocular sensors with radar technology, which allows you to recognize objects up to 0.5 inches in size. This excellent feature allows the drone to fly in the rain or even in low light conditions. The installed protection against obstacles allows you not to be afraid to fly near power lines, critical structures and in difficult areas. GPS spoofing protection, EMI and RFI countermeasures are also provided. EVO Max 4T — the only drone that combines traditional binocular vision systems with millimeter-range radar technology. This allows the EVO Max's built-in 4T Autonomy Engine to perceive objects as small as 0.5 inches, eliminating blind spots and enabling operation in low light or rain conditions.

Full protection against interference

The Autel EVO Max 4T quadcopter uses modern powerful flight control modules and algorithms specially designed to resist RFI interference, EMI and GPS spoofing. This allows the EVO Max 4T to confidently fly near power lines, critical structures and in difficult areas. Provides a stable connection of the quadcopter signal with the remote control and GPS satellites. Autel EVO Max 4T uses advanced flight control modules and algorithms specially designed to combat radio interference, electromagnetic interference and GPS spoofing. This allows the EVO Max 4T to fly confidently near power lines, critical structures and in difficult areas.

The main features of a quadcopter with a thermal imager

AUTEL EVO Max 4T – an extremely capable and portable drone. It offers users powerful technologies and extended autonomy. This model evaluates the complexity of the environment to generate a real-time 3D flight path for flawless obstacle avoidance. Advanced sensors enable flight in areas inaccessible to GPS.

The leader of drones for reconnaissance missions

EVO Max 4T offers users powerful technologies and extended autonomy. The EVO Max 4T assesses complex environments to generate real-time 3D flight trajectories for unprecedented obstacle avoidance. Advanced sensors enable flight in areas inaccessible to GPS, and an incredible new thermal payload opens up new scenarios for object identification and tracking. A rugged, weather-resistant design, the EVO Max 4T is as portable as it gets.

Autonomous Wayfinding

Autel's Autonomy Engine collects environmental data and plans 3D flight paths through complex environments such as mountains, forests and buildings. Uses include rapid 3D scene reconstruction, public safety surveillance, industrial control and topographical surveying.

Navigation in GPS-prohibited environments

Advanced sensors allow the EVO Max 4T to navigate inside fortified structures, underground or without GPS. Autel EVO Max 4T uses advanced flight control modules and algorithms specially designed to combat radio interference, electromagnetic interference and GPS spoofing.

Precise object identification and tracking

Based on Autel's AI recognition technology, the EVO Max 4T can automatically identify and capture various types of targets, such as heat sources, moving people or vehicles, and perform high-altitude tracking and data collection for law enforcement.

Powerful flight characteristics

The drone can perform numerous semi-autonomous flight tasks, autonomous trajectory determination, live broadcast and "admiration" purpose and also includes various intelligent accessibility features. Potential applications for the EVO Max 4T include search and rescue, firefighting assistance, area mapping, and various patrols and inspections. The maximum take-off height of the drone reaches 7 kilometers, the flight time – 42 minutes. Takeoff and landing can withstand wind speeds of up to 12 meters per second. This drone is able to hover accurately both with and without GPS positioning. The drone received the auto-return (RTH) function, which classically works in case of loss of communication, insufficient battery charge, and it can also be activated forcibly, and for a safe return it is not important to have a satellite connection or it is not there at all, the drone will easily return at an altitude of up to 500 meters, with an error of less than 30 cm. It is also capable of developing a horizontal flight speed of up to 82.3 km/h. Max. ceiling: 7000 meters. Adapted for flights at wind speeds up to 27.8 m/s. It is powered by a 4S battery with a capacity of 8070 mAh, which, depending on the dynamics of piloting, can provide 38-42 minutes of flight time.

A-MESH 1.0 — drone-to-drone communication technology

Autel introduces a new feature called A-Mesh 1.0 that takes advantage of the drone fleet, allowing these drones to communicate with each other, fly individually or all together from the same station, and most importantly, work as radio relay points. It anticipates long-distance flights by placing the EVO Max 4T in strategic locations to optimize long-range communications. If one drone fails or unexpectedly leaves the system, the entire group will self-organize and continue to broadcast critical information. With A-Mesh, several nearby drones can act as relay points, greatly increasing the efficiency and range of BVLOS operation.

Zoom camera

On-board multi-sensor camera unit built into a high-precision mechanical 3-axis gimbal, with a manual operating range from -90 ° up to +30 °. First and foremost is a zoom camera with 8K resolution, 10x optical zoom and 160x digital zoom. Hybrid zoom with clear details of targets at a distance of up to 2 kilometers.

Laser rangefinder and built-in thermal imager

The camera unit includes a thermal imaging camera with a resolution of 640 × 512 pixels with 16x digital zoom and temperature range from -20° up to 550°. The laser rangefinder provides the ability to measure the distance to an object or between objects with a range from 5 to 1200 meters and with an accuracy of up to 1 meter.

Wide-angle camera

The built-in wide-angle camera with a resolution of 50MP is built on the basis of a 1/1.28-inch CMOS matrix with a viewing angle of 85° at the maximum aperture of f/1.9. It also has a special Moonlight Agorithm 2.0 algorithm, which speeds up post-processing and allows the pilot to take clear, detailed images in low-light conditions. Video: support 4K 30 frames per second, max. ISO 64000. Photo: "Moonlight" mode; reduces noise and improves HDR.

Smart Controller V3

To control the Autel EVO Max 4T quadcopter, the developer offers the new Smart Controller V3 control panel. It is based on a 7.9-inch screen with a resolution of 2048 × 1536 pixels, brightness 2000 nits. The remote control has great autonomy and fast data transfer, as well as quick access to HDMI connectors, built-in memory and much more. And when you combine the controller with the Live Deck 2 accessory, you can broadcast a video stream to several display devices at once. The Autel Enterprise program has been created from the ground up and has a completely new interface for simple and efficient work. Additional functions and semi-autonomous modes maximize the capabilities of EVO Max 4T.

Multi-projection

The drone's video system allows you to simultaneously display several image sources on the screen, for example, image zoom, thermal imaging and a map. The AR Scene function overlays a video image of the position of aircraft equipped with ADS-B transponders and control points specified by the operator. It is noted that these features will be available later.

Smart Features

The Autel Enterprise app provides access to drone settings, commands management, as well as other interesting functions designed for corporate users. So, for example, it provides for the preparation of automatic departures on track points specified on 3D maps, the possibility of creating quick missions while other missions are performed using the system of summarization and priorities, or it is possible to remember missions, where thanks to the recording of all flight parameters, including camera control, it is possible to implement a similar next flight, but already in fully automatic mode.

Automatic missions

The drone system offers a fairly wide set of automissions, including: monitoring terrain elevation, with the possibility of changes both during the flight and by importing KML data, extended waypoints, auto shooting at an angle for 5 passes, spiral auto flight, vertical auto flight and auto flight along corridors for monitoring such structures as roads, rivers. width="900" />