The EcoFlow alternator charger delivers up to 800W of power.

On-the-go charging power, capable of charging 1 kWh in 75 minutes. It connects to your vehicle's alternator, which generates electricity while the vehicle is moving. The EcoFlow alternator charger utilizes this additional power with its built-in DC-DC boost converter, efficiently charging EcoFlow portable power stations.

• Charge 1 kWh in just 1.3 hours while driving.
• 3-in-1 fast charger.
• Expand your RV's existing battery capacity
• Guaranteed safety for any adventure
• Clean, easy, no-mess installation
• Suitable for utility vehicles (SUVs, pickups, vans)

Easy Installation

Step 1: Fuse to Input Cable
Connect the fuse cable to the input cable at one end.
Step 2: Fuse to Battery
Connect the fuse cable to the vehicle battery at the other end.
Step 3: Black Cable to Chassis
Connect the black cable to the chassis connector.
Step 4: Thread the Cable
Pull the other end of the input cable through the vehicle body towards the
charger.
Step 5: Connect the cable to the charger
Connect the other end of the input cable to the EcoFlow alternator
Charger.
Step 6: Output cable from the charger to the power station
Connect the output cable from the EcoFlow alternator charger to the
portable power station.

Can be used to charge batteries in situations where access to a standard power grid is limited or impossible, such as on road trips or in remote areas. These charging stations can be useful for those who travel a lot or work in remote areas and need to charge their car battery.
Input 11-35V, 76A Max. 40-60V, 21A Max. 40-60V, 3A Max. Output 40-60V, 800W Max. 13.8V/27.6V, 800W Max. 13.8V/27.6V, 100W Max